Liesegang dv335 User Manual download pdf (Page 7)

ENGLISH-6

INSTALLATION

Installation of the Projector and Screen

CAUTION

• Install the projector in a suitable environment according to instructions of the

accompanying manual “SAFETY INSTRUCTIONS” and this manual.

• Please basically use liquid crystal projector at the horizontal position.

If you use liquid

crystal projector by the lens up position, the lens down position and the side up position, this

may cause the heat inside to build up and become the cause of damage.

Be especially

careful not to install it with ventilation holes blocked.

Refer to the drawing and table below for determining of the screen size and projection distance.

TOP VIEW

SIDE VIEW

a: Distance from the LCD projector to the screen.

The projection distance shown in the table below

are for full size (1024 x 768 dots).

Table 1. Installation Reference

Screen size

(inches)

a (inches)

Min. Max.

40 65 78

60 98 117

80 131 157

100 163 196

120 196 236

150 246 295

200 328 394

Angle Adjustment

Use the foot adjuster on the bottom of the projector to adjust the projection angle. It is variable

within 0˚ to 9˚ approximately.

1. Lift up the front side of the projector, and pressing

the foot adjuster button, adjust the projection angle.

2. Release the button to lock at the angle to be fixed.

3. Turn the rear foot adjuster to adjust the left-right slope.

CAUTION

Do not release the foot adjuster button unless the projector is being held; otherwise, the

projector could overturn or the fingers could get caught and cause personal injury.

Foot Adjuster

Press the foot adjuster button

Rear Foot Adjuster

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

No comments

Liesegang dv335 User Manual Page 7